There exist many receivers, which depending on the selected skyfrequency have a different configuration concerning switches, sideband or the calculation of the ULO-frequency. As the normal LINE command does not inhibit all these possibilities, I formerly introduced the commands LINRX and FRQRX to set the right receiver configuration depending on the input frequency (see here ).

For these special receivers I now changed the LINE command in that way, that it works similar like this LINRX command. The "old" line command can be accessed by the command XLINE.

That means, with normal receivers the LINE command works like the known "old" command, as described in the manual.Receivers, which have frequency dependent configurations, will work with a LINE command, that corrects the input data from the line catalog depending on that special receiver.

Effelsberg Home