Next:
Contents
The Command Language
OBS
inp
Version for the Effelsberg 100-m RT
updated March 1998
(J. Neidhöfer)
Contents
What's New in this Version
Introduction
FOREWORD to the Original IRAM-Version
Fundamentals
Active and Passive Field
OBS
inp
Syntax.
Setting Up an Observation.
General Terminology of the Manual.
Basic Definitions
The Console Keys
Working with
OBS
inp
OBS
inp
under
OBS
E
ON-LINE Help
Input of Angles
Azimut/Elevation LIMITS of the 100-m Telescope
Using Command Files
The Protocol File
Opening a New Protocol File
Entering Comments in the Protocol File
Catalogs of Radio Source Data
Coordinate Systems
The Special Cases B = 2 and B = 7 :
The Case B = 10 :
General NOTE:
TABLE 1
Astronomical Basis Systems
TABLE 2
Solar System Objects
The Planets
The Satellites of a Planet
An Arbritrary Body of the Solar System
Geostationary Satellites
The Descriptive
,
Coordinate System
The Effect of OLAM and OLAM *
Schematic Diagram of a Cross-scan and Cross-raster
The Azimut/Elevation - System (A,a)
Control of the Subreflector (FC
i
)
Polarization Control (POS)
The Telescope Pointing
The Pointing Constants
The Pointing Corrections
The Meaning of the Pointing Corrections
Limits on the Input Values
Displaying the Pointing Constants
The Constants for Hysteresis Effects
The Constants for Receiver Position
Other Control Commands
Starting and Stopping a Scan.
Clearing Options and Offsets
Book-keeping Commands
Input and Use of Weather Data
Radial Velocities and Frequency Calculations
Control of the Frontends
Frequencies
Oscillator System
Frontend Control
Control of the Backends
Continuum Backend
Analog Chart Recorder Output
Data Output
Line Backends
1024-Channel Autokorrelator
Handling Frequencies and Velocities
Control Commands
Data Output
Data Compression Mode
8192-Channel Autokorrelator
Handling Frequencies and Velocities
Control Commands
Data Output
Index
About this document ...
Juergen Neidhoefer
3/6/1998
, 
Coordinate System